4 Web-based Switch Configuration
D-Link DGS-2000 Series Ethernet Switch User Manual
4
4
1
1
Figure 4.40 – System > Ping Test
Target IP address
allows both
IPv4
and
IPv6
addresses format.
The time of ping can be configured in
Repeat Pinging
filed;
Infinite
and range of
1-255
are available options
to use.
Timeout
filed specifies the timeout value of every single ping packet. The timeout range from
1- 99
seconds.
Click
Start
to initiate the Ping Program
System > Trace Route
Perform trace route command direct on system interface. This command used to probe path to the specific
destination address.
Figure 4.41 – System > Trace Route
IP address
: Specify the destination IP address
TTL
: Specify the maximum Time-to-Live
Timeout
: Specify the maximum time for response in a hop.
Probe
: Specify the time to probe the destination.
System > MAC Notification Settings
MAC Notification page is used to monitor MAC addresses learned and entered into the forwarding database.
To globally set MAC notification on the Switch, user should enabled or disabled state, input the Time
Interval
between notification and
History Size
then click the
Apply
button.
Figure 4.42 – System > MAC Notification Settings
State:
Enabled or Disabled MAC notification globally on the Switch.
