D-Link DGS-2000 Series Reference Manual Download Page 116

Page: 116 / 144

4 Web-based Switch Configuration

D-Link DGS-2000 Series Ethernet Switch User Manual

VLAN Name:

Specify the name of the VLAN for which to be displayed the IGMP Snooping Group nformation.

VID:

Specify the list of the VLAN IDs for which to be displayed the IGMP Snooping Group information.

Group IP Address:

Specify the static group address for which to be displayed the IGMP Snooping static

group information.

Click

Find VLAN

to display the IGMP group information or click

Clear Data Driven

to clear the IGMP group

information.

Monitoring > IGMP Snooping > IGMP Snooping Host

The IGMP Snooping Host page allows user to display the information of IGMP Snooping Host.

Figure 4.164 - Monitoring > IGMP Snooping > IGMP Snooping Host

VLAN Name:

Specify the name of the VLAN for which to be displayed the IGMP Snooping Host information.

VID (1-4094):

Specify the list of the VLAN IDs for which to be displayed the IGMP Snooping Host information.

Port:

Specify the ports of IGMP Snooping Host information to be displayed.

Group:

Specify the group of IGMP Snooping Host information to be displayed.

Click

Find

to display the information.

Monitoring > MLD Snooping > MLD Snooping Group

The MLD Snooping Group page allows user to configure the MLD Snooping group settings.

Figure 4.165 - Monitoring > MLD Snooping > MLD Snooping Group

VLAN Name:

Specify the VLAN name for MLD Snooping group.

VID:

Specify the VID for MLD Snooping group.

Group IP Address:

Specify the IP address for the specified VLAN.

Click

Find Vlan

to locate a specific entry based on the information entered.

Click

View All

to display all the existing entries.

Click

View All Data Driven

to display all existing entire entries.

Click

Clear All Data Driven

to clear data driven information for all entries.

Summary of Contents for DGS-2000 Series

















































































































































Search results

Summary of Contents for DGS-2000 Series

Reviews:

Brands by name

Popular brands

D-Link DGS-2000 Series, Reference Manual

Search results

Summary of Contents for DGS-2000 Series

Reviews:

Brands by name

Popular brands