DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
251
Time Range
Enter the name of the time range to associate with this ACL rule.
After selecting the
ICMP
option as the
Protocol Type
, the following page and parameters will be
available, as shown below:
Figure 8-89 Extended Expert ACL (Add Rule) ICMP window
The
dynamic
fields that can be configured are described below:
Parameter
Description
Source IP Address
Select and enter the source information here. Options to choose from
are
Any
,
Host
, and
IP
. When the
Any
option is selected, any source
traffic will be evaluated according to the conditions of this rule. When
the
Host
option is selected, enter the source host’s IP address here.
When the
IP
option is selected, the
Wildcard
option will also be
available. Enter the group of source IP addresses by using a wildcard
bitmap. The bit corresponding to the bit value 1 will be ignored. The bit
corresponding to the bit value 0 will be checked.
Destination IP Address
Select and enter the destination information here. Options to choose
from are
Any
,
Host
, and
IP
. When the
Any
option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the
Host
option is selected, enter the destination host’s IP
address here. When the
IP
option is selected, the
Wildcard
option will
also be available. Enter the group of destination IP addresses by using
a wildcard bitmap. The bit corresponding to the bit value 1 will be
ignored. The bit corresponding to the bit value 0 will be checked.
Source MAC Address
Select and enter the source information here. Options to choose from
are
Any
,
Host
, and
MAC
. When the
Any
option is selected, any
source traffic will be evaluated according to the conditions of this rule.
When the
Host
option is selected, enter the source host’s MAC
Summary of Contents for DGS-1510 Series
Page 1: ...1...
