D-Link DGS-1510 Series Web Ui Reference Manual Download Page 103

Page: 103 / 430

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

The fields that can be configured are described below:

Parameter

Description

VLAN Mode

Select the VLAN mode option here. Options to choose from are

Access

Hybrid

, and

Trunk

Acceptable Frame

Select the acceptable frame behavior option here. Options to choose
from are

Tagged Only

Untagged Only

, and

Admit All

Ingress Checking

After selecting

Trunk

as the

VLAN

Mode

the following parameter will

be available. Select to enable or disable the ingress checking function.

Native VLAN

Tick the check box to enable the native VLAN function. Also select if
this VLAN supports

Untagged

Tagged

frames.

VID

After ticking the

Native VLAN

check box, this option will be available.

Enter the VLAN ID used for this configuration here. This value must be
between 1 and 4094.

Action

Select the action that will be taken here. Options to choose from are

All

Add

Remove

Except

, and

Replace

Allowed VLAN Range

Enter the allowed VLAN range information here.

Click the

Apply

button to accept the changes made.

Click the

Back

button to return to the previous window.

Auto Surveillance VLAN

Auto Surveillance Properties

This window is used to configure the auto surveillance VLAN global settings and display the ports
surveillance VLAN information.

To view the following window, click

L2 Features > VLAN > Auto Surveillance VLAN > Auto

Surveillance Properties

, as shown below:

Summary of Contents for DGS-1510 Series















































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1510 Series

Reviews:

Brands by name

Popular brands

D-Link DGS-1510 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-1510 Series

Reviews:

Brands by name

Popular brands