DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
123
Group Address
Enter an IPv6 multicast group address.
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
VID
Click the radio button and enter a VLAN ID of the multicast group.
Group Address
Click the radio button and enter an IP multicast group address.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Find All
button to view all the entries.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
The fields that can be configured for
MLD Snooping Groups Table
are described below:
Parameter
Description
VID
Click the radio button and enter a VLAN ID of the multicast group.
Group Address
Click the radio button and enter an IP multicast group address.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Find All
button to view all the entries.
MLD Snooping Mrouter Settings
This window is used to configure the specified interface(s) as the router ports or forbidden to be IPv6
multicast router ports on the VLAN interface on the Switch.
To view the following window, click
L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Mrouter Settings
, as shown below:
Figure 5-47 MLD Snooping Mrouter Settings window
The fields that can be configured for
MLD Snooping Mrouter Settings
are described below:
Parameter
Description
VID
Enter a VLAN ID between 1 and 4094.
Configuration
Select the port configuration. Options to choose from are
Port
,
Forbidden Port
, and
Learn pimv6
.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
