DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
31
4.
Management
User Account Settings
Password Encryption
Login Method
SNMP
RMON
Telnet/Web
Session Timeout
DHCP
DNS
IP Source Interface
File System
Physical Stacking
Virtual Stacking (SIM)
D-Link Discovery Protocol
User Account Settings
This window is used to create and configure the user accounts. The active user account sessions can be
viewed.
NOTE:
By default, there is no user account created on the Switch.
There are several configuration options available in the Web User Interface (Web UI). The set of
configuration options available to the user depends on the account’s
Privilege Level
. A user account
created with a higher privilege level will be given access to configure more features than a user account
created with a lower privilege level.
The pre-defined user account privilege levels supported by this switch are:
•
Basic User - Privilege Level 1.
This user account level has the lowest priority of the user
accounts. The purpose of this type of user account level is for basic system checking.
•
Operator - Privilege Level 12.
This user account level is used to grant system configuration
rights for users who need to change or monitor system configuration, except for security related
information such as user accounts and SNMP account settings.
•
Administrator - Privilege Level 15.
This administrator user account level can monitor all system
information and change any of the system configuration settings expressed in this guide.
To view the following window, click
Management > User Account Settings
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
