DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
176
used. When selecting the
Range
option, the start port number and end
port number selected, of the range, will be used. Alternatively, the port
number(s) can manually be entered in the space(s) provided, if the
port number(s) is/are not available in the drop-down list.
Destination Port
Select and enter the destination port value here. Options to choose
from are
=
,
>
,
<
,
≠
, and
Range
. When selecting the
=
option, the
specific selected port number will be used. When selecting the
>
option, all ports greater than the selected port, will be used. When
selecting the
<
option, all ports smaller than the selected port, will be
used. When selecting the
≠
option, all ports, excluding the selected
port, will be used. When selecting the
Range
option, the start port
number and end port number selected, of the range, will be used.
Alternatively, the port number(s) can manually be entered in the
space(s) provided, if the port number(s) is/are not available in the
drop-down list.
IP Precedence
Select the IP precedence value used here. Options to choose from are
0 (routine)
,
1 (priority)
,
2, (immediate)
,
3 (flash)
,
4 (flash-override)
,
5 (critical)
,
6 (internet)
, and
7 (network)
.
ToS
After selecting the IP precedence value, select the Type-of-Service
(
ToS
) value that will be used here. Options to choose from are
0
(normal)
,
1 (min-monetary-cost)
,
2 (max-reliability)
,
3
,
4 (max-
throughput)
,
5
,
6
,
7
,
8 (min-delay)
,
9
,
10
,
11
,
12
,
13
,
14
, and
15
.
DSCP
Select or enter the DSCP value used here. This value must be
between 0 and 63.
Time Range
Enter the name of the time range to associate with this ACL rule.
Action
Select the action that this rule will take here. Options to choose from
are
Permit
and
Deny
.
Summary of Contents for DGS-1510 Series
Page 1: ...1...