DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
183
between 0 and 63.
Time Range
Enter the name of the time range to associate with this ACL rule.
Action
Select the action that this rule will take here. Options to choose from
are
Permit
and
Deny
.
After selecting the
OSPF
option as the
Protocol Type
, the following section will appear.
Figure 8-13 ACL Configuration Wizard (Add Rule for IPv4 ACL) OSPF window
The
dynamic
fields that can be configured are described below:
Parameter
Description
Fragments
Select the
Fragments
option to include packet fragment filtering.
Source
Select and enter the source information here. Options to choose from
are
Any
,
Host
, and
IP
. When the
Any
option is selected, any source
traffic will be evaluated according to the conditions of this rule. When
the
Host
option is selected, enter the source host’s IP address here.
When the
IP
option is selected, the
Wildcard
option will also be
available. Enter the group of source IP addresses by using a wildcard
bitmap. The bit corresponding to the bit value 1 will be ignored. The bit
corresponding to the bit value 0 will be checked.
Destination
Select and enter the destination information here. Options to choose
from are
Any
,
Host
, and
IP
. When the
Any
option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the
Host
option is selected, enter the destination host’s IP
address here. When the
IP
option is selected, the
Wildcard
option will
also be available. Enter the group of destination IP addresses by using
a wildcard bitmap. The bit corresponding to the bit value 1 will be
ignored. The bit corresponding to the bit value 0 will be checked.
IP Precedence
Select the IP precedence value used here. Options to choose from are
0 (routine)
,
1 (priority)
,
2, (immediate)
,
3 (flash)
,
4 (flash-override)
,
Summary of Contents for DGS-1510 Series
Page 1: ...1...
