DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
380
The fields that can be configured for
IPv4 Trace Route
are described below:
Parameter
Description
IPv4 Address
Select and enter the IPv4 address of the destination here.
Domain Name
Select and enter the domain name of the destination here.
Max TTL
Enter the Time-To-Live (TTL) value of the trace route request here.
This is the maximum number of routers that a trace route packet can
pass. The trace route option will cross while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops.
Port
Enter the port number here. The value range is from 30000 to 64900.
Timeout
Enter the timeout period while waiting for a response from the remote
device here. A value of 1 to 65535 seconds can be specified. The
default is 5 seconds.
Probe Times
Enter the probe time number here. The range is from 1 to 9. If
unspecified, the default value is 1.
The fields that can be configured for
IPv6 Trace Route
are described below:
Parameter
Description
IPv6 Address
Select and enter the IPv6 address of the destination here.
Max TTL
Enter the Time-To-Live (TTL) value of the trace route request here.
This is the maximum number of routers that a trace route packet can
pass. The trace route option will cross while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops.
Port
Enter the port number here. The value range is from 30000 to 64900.
Timeout
Enter the timeout period while waiting for a response from the remote
device here. A value of 1 to 65535 seconds can be specified. The
default is 5 seconds.
Probe Times
Enter the probe time number here. The range is from 1 to 9. If
unspecified, the default value is 1.
Click the
Start
button to initiate the route trace for each individual section.
After clicking the
Start
button in
IPv4 Trace Route
section, the following
IPv4 Trace Route Result
section will appear:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
