DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
269
from are
Any
,
Host
, and
MAC
. When the
Any
option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the
Host
option is selected, enter the destination host’s
MAC address here. When the
MAC
option is selected, the
Wildcard
option will also be available. Enter the destination MAC address and
wildcard value in the spaces provided.
IP Precedence
Select the IP precedence value used here. Options to choose from are
0 (routine)
,
1 (priority)
,
2, (immediate)
,
3 (flash)
,
4 (flash-override)
,
5 (critical)
,
6 (internet)
, and
7 (network)
.
ToS
After selecting the IP precedence value, select the Type-of-Service
(
ToS
) value that will be used here. Options to choose from are
0
(normal)
,
1 (min-monetary-cost)
,
2 (max-reliability)
,
3
,
4 (max-
throughput)
,
5
,
6
,
7
,
8 (min-delay)
,
9
,
10
,
11
,
12
,
13
,
14
, and
15
.
DSCP
Select or enter the DSCP value used here. This value must be
between 0 and 63.
VID
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
CoS
Select the Class of Service (CoS) value here. Options to choose from
are from
0
to
7
.
Time Range
Enter the name of the time range to associate with this ACL rule.
Click the
Back
button to discard the changes made and return to the previous page.
Click the
Apply
button to accept the changes made.
To enable the
Counter State
option or to enter a
Remark
for the profile, click the
Edit
button, next to the
specific ACL profile (found in the ACL profile table).
Figure 8-101 Extended Expert ACL (Edit ACL) window
The fields that can be configured are described below:
Parameter
Description
Start Sequence No.
Enter the start sequence number here.
Stop
Enter the stop sequence number here.
Counter State
Select to enable or disable the counter state option here.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
