DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
25
Figure 3-17 System Log Server Settings window
The fields that can be configured are described below:
Parameter
Description
Host IPv4 Address
Enter the system log server’s IPv4 address here.
Host IPv6 Address
Enter the system log server’s IPv6 address here.
UDP Port
Enter the system log server’s UDP port number here. This value must
be 514 or between 1024 and 65535. By default, this value is 514.
Severity
Select the severity value of the type of information that will be logged.
Options to choose from are
0 (Emergencies)
,
1 (Alerts)
,
2 (Critical)
,
3 (Errors)
,
4 (Warnings)
,
5 (Notifications)
,
6 (Informational)
, and
7
(Debugging)
.
Facility
Select the facility value here. Options to choose from are 0 to 23.
Discriminator Name
Enter the discriminator name here. This name can be up to 15
characters long.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
System Log
This window is used to view and clear the system log.
To view the following window, click
System > System Log > System Log
, as shown below:
Figure 3-18 System Log window
Click the
Clear Log
button to clear the system log entries displayed in the table.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
System Attack Log
This window is used to view and clear the system attack log.
To view the following window, click
System > System Log > System Attack Log
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
