Cypress Traveo S6J32E Series Manual Download

Page: 1 / 167

S6J32E, S6J32F, S6J32G Series

32-bit Microcontroller Traveo



Datasheet

Cypress Semiconductor Corporation

• 198 Champion Court • San Jose

CA 95134-

1709 • 408-943-2600

Document Number: 002-10689 Rev *H

Revised December 13, 2017

The S6J32E, S6J32F, and S6J32G series is an extension of the existing S6J3200 series with 4-MB Flash, 512-KB RAM, and

Ethernet RMII support.

The S6J3200 series microcontrollers are members of the 55-nm Traveo

™

family targeting Cluster and Head-Up Display (HUD).

They are built as a single-chip solution to drive a complete mid-range instrument cluster. They can control up to six gauges and

drive up to two Thin Film Transistor (TFT) displays with WVGA resolution (854 × 480 pixels each). For connecting a HUD, one

display output can be warped on-the-fly for the necessary correction of the windshield bulge. A powerful 2.5D graphics engine

enables the device to be used for many mid-range graphics applications.

Features

Key Features



240-MHz Arm

Cortex

R5F CPU



4-MB internal high-speed Flash memory, 512-KB RAM



Supports 2.7 V to 5.5 V and 2.7 V to 3.6 V I/O supply voltage



1.2-V core power supply



50-channel 12-bit SAR A/D converter with 1-Msps
conversion rate



Embedded 4-channel CAN FD controller



12-channel Multi-Function Serial (MFS) communication block



Optional Ethernet AVB with MII and RMII interface



Two-channel DDR HSSPI



Optional HyperBus

™ interface



Optional Media-LB (MOST25) interface



Six-channel Stepper Motor Controller



Enhanced sound function for high quality



2D/2.5D graphics subsystem with video capture, 2-MB
VRAM, dual-display support, on-the-fly-warping



Optional embedded Secure Hardware Extension (SHE) with
AES-128 encryption and decryption



Flash memory retention time up to 20 years



ASIL-B support on ISO26262 specification



256-pin, 216-pin, and 208-pin TEQFP packages



Power domain control

Applications



Automotive cluster application



Classic Cluster Control



Head-Up Display

Summary of Contents for Traveo S6J32E Series








































































































































































Search results

Summary of Contents for Traveo S6J32E Series

Reviews:

Related manuals for Traveo S6J32E Series

Brands by name

Popular brands

Cypress Traveo S6J32E Series, Manual

Search results

Summary of Contents for Traveo S6J32E Series

Reviews:

Related manuals for Traveo S6J32E Series

Brands by name

Popular brands