© 2018 Cyphre Security Solutions, LLC.
3 – 93
BT1 Security Appliance User Guide
3 BT1 Installation
Figure 3 - 79: BT1 Right-angle Riser Card
Figure 3 - 80: BT1 PCIe RAID Card
Bracket
Figure 3 - 81: Sample SATA Cable
Note:
Record your controller serial number in a safe location in case
you need to contact Cyphre Customer Support.
To remove the RAID card:
1.
Power down the appliance. "Powering Down an Appliance " on page 39
2.
Disconnect the power cord from the power supply.
3.
Disconnect the signal cables.
4.
Remove the cover from the appliance."Removing the Appliance Cover " on page 62
5.
Remove the two controller mount screws from the rear panel insert. See the image
below.
Confidential
