© 2018 Cyphre Security Solutions, LLC.
3 – 85
BT1 Security Appliance User Guide
3 BT1 Installation
Remove the fan wall:
1.
The fan wall is in the center of the chassis, shown in the image below.
Figure 3 - 74: Location of the Fan Wall
2.
A multi-pin header connector provides power to the wall.
3.
Two Philip round-head screws hold the assembly in place..
Figure 3 - 75: Location of Fan Wall Electrical
Header.
Figure 3 - 76: Remove Fan Wall Screws
4.
Unplug the connector.
5.
Remove carefully the two Philips screws, extracting each one and laying them to the side.
See the image above.
Confidential
