5 – 184
© 2018 Cyphre Security Solutions, LLC.
5.19 Command: sdr
get <id> ... [<id>]
Prints information for sensor data records specified by sensor id.
info
This command will query the BMC for SDR information.
type [<sensor type>]
This command will display all records from the SDR Repository of a specific type.
Run with type list (or simply with no type) to see the list of available types. For
example to query for all Temperature sensors:
> ipmitool sdr type Temperature
Baseboard Temp | 30h | ok | 7.1 | 28 degrees C
FntPnl Amb Temp | 32h | ok | 12.1 | 24 degrees C
Processor1 Temp | 98h | ok | 3.1 | 57 degrees C
Processor2 Temp | 99h | ok | 3.2 | 53 degrees C
list | elist [all|full|compact|event|mcloc|fru|generic]
This command will read the Sensor Data Records (SDR) and extract sensor information
of a given type, then query each sensor and print its name, reading, and status. If
invoked as elist, it will also print sensor number, entity id and instance, and
asserted discrete states.
Valid types are:
all
All SDR records (Sensor and Locator)
full
Full Sensor Record
compact
Compact Sensor Record
event
Event-Only Sensor Record
mcloc
Management Controller Locator Record
fru
FRU Locator Record
generic
Generic SDR records
entity <id>[.<instance>]
Confidential
BT1 Security Appliance User Guide
5 About the IPMITool
