© 2018 Cyphre Security Solutions, LLC.
3 – 67
BT1 Security Appliance User Guide
3 BT1 Installation
7.
Check the socket for dust and debris.
DIMM Clamps
Figure 3 - 55: DIMM Clamps
8.
Insert the new module into its slot. Pay attention to the notch along the bottom of the
module to prevent inserting the DIMM incorrectly.
9.
Press down until it snaps into place and secure the hold down clips on each end.
Note:
Never force-fit DIMMs into their sockets. Ensure the
notches are properly aligned.
10.
Power up the appliance and observe for normal operation. "Powering Up an Appliance "
on page 36.
Confidential
