© 2018 Cyphre Security Solutions, LLC.
3 – 83
BT1 Security Appliance User Guide
3 BT1 Installation
3.22 Fan Wall Replacement
The BT1 fan wall is the primary air movement device. It houses 5 high velocity miniature fans. The
system controls each fan, which allows air flow regulation. Replacing the fan wall is a straight forward
procedure.
Materials Required: 1 BT1 Fan Wall with terminated pig tail.
Tools Required: #2 Philips screwdriver, ESD equipment.
Use ESD best practices to avoid electrostatic discharge on or within the appliance.
Utilisez les meilleures pratiques ESD pour éviter une décharge électrostatique sur ou
dans le serveur.
Shutdown and remove the BT1 Security Appliance
1.
Ensure the appliances in the Duo-Pack™ Tray are powered down.
2.
Ensure the power supplies are disconnected from the power cord.
3.
Loosen the retaining screws on each side of the tray bezel .
Figure 3 - 70: Power Buttons on the Duo-Pack™ Appliances.
4.
Slide the optional tray accessory out from the rack.
5.
Remove the affected appliance from the optional tray accessory.
6.
Unscrew with retainer clip located on the rear of the optional tray accessory.
Confidential
