3 – 84
© 2018 Cyphre Security Solutions, LLC.
Figure 3 - 71: Optional Tray Accessory Rear Assembly
7.
Slide the chassis backward about 3/8" until the PEM alignment posts are in the lift out
position. See image below.
Figure 3 - 72: PEM Alignment posts in the lift out position.
8.
Lift the chassis out of the optional tray accessory.
9.
Loosen the cover retaining screw by hand or with a #2 Philips screwdriver.
Figure 3 - 73: Cover Retaining Screw
10.
With the appliance chassis in a flat, stable surface, remove the cover by sliding it
backward and lifting the rear of the cover.
Confidential
BT1 Security Appliance User Guide
3 BT1 Installation