3 – 54
© 2018 Cyphre Security Solutions, LLC.
Note:
Leave the center hole where you installed the clip-
nut blank.
2.
Insert the tray into the outer rail channels.
3.
Depress the latches on both sides of the inner rail slides and push the tray into place.
4.
Hand tighten the Phillips/slotted captive screws on each side of the bezel. If needed add
1/4 turn with a #2 Phillips head or slotted screwdriver.
Figure 3 - 30: Inserting the Tray into the Rack
3.10.4 Re-installing the Inner Rail Slides
The BT1 Optional Tray Accessory comes with the inner rail slides pre-installed. If you need to re-
install the rails, follow these instructions.
1.
Use the 10/32 x ¼ inch flat Phillips head screws that come with the rail kit to secure the rail
to the unit. (Four screws per rail.)
Note:
The screws insert from inside the tray.
2.
Do this for the left and right sides.
Confidential
BT1 Security Appliance User Guide
3 BT1 Installation
