© 2018 Cyphre Security Solutions, LLC.
3 – 79
BT1 Security Appliance User Guide
3 BT1 Installation
Label
Description
2
AC power connector.
3
Retaining screw hole
4
AC/DC Indicator Lights (Green OK. Red Error. No lights Malfunction.)
5
Cooling Fan
6
PCB power connectors
Table 3 - 7. BT1 Power Supply
Use ESD best practices to avoid electrostatic discharge on or within the appliance.
Utilisez les meilleures pratiques ESD pour éviter une décharge électrostatique sur ou
dans le serveur.
To replace the power supply in the BT1:
1.
Ensure the servers in the Duo-Pack™ Tray are powered down.
2.
Ensure the appliance is powered down.
3.
Loosen the retaining screws on each side of the tray bezel .
Figure 3 - 64: Power Buttons on the Duo-Pack™ Appliances.
4.
Slide the Duo-Pack™ Tray out from the rack.
5.
Remove the appliance from the optional tray accessory.
6.
Disconnect the power cord from the back of the appliance.
7.
Unscrew with retainer clip located on the rear of the optional tray accessory.
Confidential
