manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 437

On Screen Display

421

                                 Configure Menu Overview

 

 

Save/Load Configuration Screens

You can use the Save/Load Config option on the OSD Configuration Menu to 
save any configuration changes you have made since the last save into a 
backup directory or onto an FTP server. You can also restore configuration file 
changes from a backup directory or FTP server to overwrite any configuration 
changes that were made since the last save.

The Save/Load Config screen appears as shown in the following figure. Not 
all options are visible.

The following diagram lists the Save/Load Configuration screens.

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands