manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 343

Accessing Connected Devices

327

                                 Connecting to Servers Locally Through the OSD

 

• Type the first letters of the port name in the quick search box until the 

desired port is highlighted in the port list box.

This field is case-sensitive. 

• Select the desired port using the port list box. 

4.

Press Enter.

Your monitor displays the work station of the connected server.

See Table 6-3, “Tasks Available While Connected to KVM Ports,” on 
page 328 for a complete lists of the tasks available while connected to KVM 
ports and references to the related instructions.

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands