manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 203

Web Manager for Administrators

187

                                 Configuration

 

 

Configuring Cascaded KVM Units

The Devices form allows you to configure one or more secondary KVM units 
to a primary KVM unit, a process also known as cascading or daisy-chaining. 
See “Cascaded Devices” on page 21 for background information. 

Selecting Configuration>KVM>Devices in Expert mode brings up the 
Devices form on which you can perform the following tasks.

•

Add a secondary KVM unit to be cascaded from the master KVM/net.

See “To Add a Secondary KVM Unit to be Cascaded from the Master 
KVM/net” on page 187

•

Edit the configuration of a cascaded device.

See “To Edit the Configuration of a Cascaded KVM Unit” on page 189

•

Delete the configuration of a cascaded device.

See “To Delete the Configuration of a Cascaded KVM Unit” on page 191

T

To Add a Secondary KVM Unit to be Cascaded from the 
Master KVM/net

1.

In Expert mode, go to: Configuration>KVM>Devices.

The Devices configuration form appears. 

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands