Cyclades User's Guide User Manual Download Page 234

Page: 234 / 506

Configuration

218

AlterPath KVM/net Installation, Administration, and User’s Guide

Figure 4-28:

Radius Server Authentication Form

Fill in the form according to your local setup of the RADIUS server or
servers.

Click “Done.”

Click “apply changes.”

The changes are stored in

/etc/raddb/server

on the KVM/net.

To Configure Group Authorization on a RADIUS Server

On the server, edit

/etc/raddb/users

and add a new string attribute

(ATTRIBUTE Framed-Filter-Id 11) similar to the following example.

If the Frame-Filter-Id already exists, just add the group_name to the string
starting with a colon “:”.

groupuser1

Auth-Type= Local, Password =”xxxx”

Service-Type=Callback-Framed-User,

Callback-Number=”305”,

Framed-Protocol=PPP,

Framed-Filter-

Id=”group_name=<Group1>[,<Group2>,...,<GroupN>];”,

Fall-Through=No

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Search results

Summary of Contents for User's Guide

Reviews:

Brands by name

Popular brands

Cyclades User's Guide, User Manual

Search results

Summary of Contents for User's Guide

Reviews:

Brands by name

Popular brands