manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 352

Controlling KVM Port Connections

336  

 AlterPath KVM/net Installation, Administration, and User’s Guide

Closing a KVM Connection

The ways you can close a KVM connection are listed below: 

•

For IP connections, select “Exit Viewer Client” from the AlterPath Viewer 
Shortcuts menu.

•

Use a hot key sequence (Ctrl+k q) to bring up the Connection menu, then 
select the Exit option.

•

Let the session time out.

T

To Close a KVM Connection

Do one of the following steps.

1.

To use the menu option from the AlterPath Viewer menu bar, go to 
Shortcuts and select “Exit Viewer Client.”

- OR- 

2.

To use the escape hot key, do the following steps.

a. Type the hot key escape sequence. 

Ctrl+k q is the default.

The Connection menu appears. 

b. Type “e” in the text field to highlight the Exit option.

c. Click Enter.

1.

Type the hot key escape sequence. 

Ctrl+k q is the default.

The Connection menu appears. 

2.

Type “e” in the text field to highlight the Exit option.

3.

Click Enter.

Sharing KVM Port Connections

Two authorized users can connect simultaneously to a single KVM port.

When a user connects to a KVM port that is already in use, the software 
presents a menu to the connecting user. The options on the menu depend on 

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands