manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 373

On Screen Display

357

                                 Power Management Menu

 

 

Power Management Menu

The Power Management windows allow you to check the status of the master 
AlterPath PM connected to the AUX port in addition to all cascaded PMs. 
Any user who has administration privileges can turn on, turn off, cycle 
(reboot), lock, and unlock the outlets. See “Connecting AlterPath PMs to the 
KVM/net” on page 117 for instructions on connecting PMs to the KVM/net.

T

To Power On, Power Off, Lock, Unlock, or 
Cycle Devices Plugged into PM Outlets

1.

Go to: Configure > Power Management.

The Outlet Status page appears with a list of all configured PMs. The 
status column displays whether the outlet is on or off, locked, or unlocked.

The letter U displayed in the status window indicates that the outlet is 
unlocked; the letter L indicates that the outlet is locked.

2.

Use the up or down arrow keys to select the outlet you want to edit and 
press <Enter>.

The Outlet Status window for the selected outlet appears with the current 
status listed in the Status box and the available action items listed at the 
bottom. 

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands