manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 257

Web Manager for Administrators

241

                                 Configuration

 

 

Note:User-defined chains cannot be edited. 

1.

Go to Configuration>Network>Firewall Configuration in Expert Mode.

2.

Select one of the default chains from Chain list, and then click the “Edit” 
button.

If you select a user-defined chain, the following dialog box appears.

If you select one of the default chains, the “Edit Chain” dialog box 
appears.

 

3.

Select the desired policy from the Policy drop-down list, and then click 
OK.

4.

Click “apply changes.”

5.

To edit any rules for this chain, go to “To Edit a Rule.”

T

To Edit a Rule for IP Filtering

1.

In Expert mode go to: Configuration>Network>IP Filtering.

The IP Filtering configuration form appears.

See “To Add a Rule for IP Filtering” on page 244 procedure section for a 
definition of the user input fields. 

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands