Cyclades User's Guide User Manual Download Page 110

Page: 110 / 506

Performing Basic Network Configuration

AlterPath KVM/net Installation, Administration, and User’s Guide

Enter the IP address for the DNS server and press Enter.

The Domain form appears.

Enter the domain name and press Enter.

The Hostname form appears.

Enter the hostname for the KVM/net and save the changes to complete the
basic network configuration.

The Configuration menu appears.

• To configure an NTP (network time protocol) server or to enter the date

and time manually, go to “To Set the Time and Date Using the OSD” on
page 96.

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Search results

Summary of Contents for User's Guide

Reviews:

Brands by name

Popular brands

Cyclades User's Guide, User Manual

Search results

Summary of Contents for User's Guide

Reviews:

Brands by name

Popular brands