manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 113

Installation

97

                                 Performing Basic Network Configuration

 

 

b. Enter the IP address of the NTP server.

c. Save the changes. 

4.

To enter the date and time manually, do the following.

a. On the Date/time conf. form, select disabled.

The Date entry screen appears.

b. Enter the date in the format shown and press Enter.

The Time entry screen appears.

c.  Enter the time in the format shown and save the changes. 

If you are performing an initial configuration of basic networking 
parameters, go to: “Completing Configuration Using the Web Manager” 
on page 98.

Otherwise, go to the appropriate menu option for your next task.

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands