manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 270

Configuration

254  

 AlterPath KVM/net Installation, Administration, and User’s Guide

SNMP traps, a version of the Unix 'netstat' command using SNMP, and a Tk/
Perl mib browser. 

SNMP is configured with community names, OID and user names. The 
KVM/net supports SNMP v1, v2, and v3. The two versions require different 
configurations. SNMP v1/v2 requires community, source, object ID and the 
type of community (read-write, read-only). V3 requires user name. 

Important: 

Check the SNMP configuration before gathering information about KVM/net 
by SNMP. An unauthorized user can implement different types of attacks to 
retrieve sensitive information contained in the MIB. By default, the SNMP 
configuration in KVM/net cannot permit the public community to read SNMP 
information.

T

To Configure SNMP

1.

In Expert Mode go to: Configuration>Networks>SNMP.

The SNMP form appears. 

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands