manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 225

Web Manager for Administrators

209

                                 Configuration

 

 

Group Authorization

Group authorization adds an additional level of system security by enabling a 
network-based authorization in addition to the initial authentication. 

A group information retrieval from the , RADIUS, LDAP, and 
NTLM authentication servers enables authorization in addition to 
authentication. An administrator can configure the authentication server to 
add group authorization checking. 

The following table points to procedures on configuring an authentication 
server for group authorization.

T

To Identify a Kerberos Authentication Server

Perform this procedure to identify the authentication server when the KVM/
net or any of its ports is configured to use the Kerberos authentication method 
or any of its variations (Kerberos, Local/Kerberos, Kerberos/Local, or 
KerberosDownLocal.) 

Before starting this procedure, find out the following information from the 
Kerberos server’s administrator:

•

Realm name and KDC address

•

Host name and IP address for the Kerberos server

Also, work with the Kerberos server’s administrator to ensure that following 
types of accounts are set up on the Kerberos server and that the administrators 

To Configure Group Authorization on a LDAP Server

Page 214

To Configure Group Authorization on a NTLM Server

Page 214

To Configure Group Authorization on a RADIUS Server

Page 218

To Configure Group Authorization on a Server

Page 221

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands