manualshive.com logo in svg

Cyclades User's Guide, User Manual

Share
Download
Cyclades User's Guide User Manual Download Page 204

Configuration

188  

 AlterPath KVM/net Installation, Administration, and User’s Guide

2.

Click the Add Device button. 

The Modify Device dialog box appears. 

3.

In the Device Name field, specify a name for the secondary device or 
KVM unit.

4.

In the Number of Ports field, enter the number of ports contained in the 
cascaded device.

5.

In the KVM Port Connected to User 2 (KVM) or B (Expander) drop-down 
list, enter the port number of the master KVM/net that is connected to the 
User 2 port of the secondary KVM device or the B port on the Expander.

Summary of Contents for User's Guide



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands