Curve Beam pedCAT, Operator'S Manual, Page: 23 / 168

22
0473
90001 Rev 07.26.13
Planned Maintenance – Monthly Schedule:
The system requires monthly maintenance check for failed or faulty indicators/lights.
1. Procedure for checking for failed or faulty indicators/lights. If any of the below do
not behave as expected, then please contact CurveBeam Technical Support at
the number on the front cover of this manual.
CB-Tools Program:

From the ACQ Desktop area, click on the CB-Tools icon. This icon will
open the interface required for the checks.

WARNING LIGHT: In this interface, first click on WARNING LIGHT TEST
button. If your system has a warning light installed, then the WARNING
LIGHT should turn ON. If the warning light does not function check the
electrical connections, power and indicator lights/audible alarms for
IT IS THE RESPONSIBILITY OF THE USER TO INSURE THAT THE
EQUIPMENT IS MAINTAINED IN COMPLIANCE WITH THE
MANUFACTURER'S RECOMMENDED MAINTENANCE SCHEDULE. THE
MANUFACTURER AND THE ASSEMBLER / INSTALLER ARE RELIEVED
FROM RESPONSIBILITY IN THOSE CASES WHERE NON-COMPLIANCE
WITH THE STANDARD RESULTS FROM THE USER'S FAILURE TO HAVE
THE MANUFACTURER'S RECOMMENDED MAINTENANCE PERFORMED.
The actual maintenance inspection and consequent service must be
accomplished either by an authorized factory trained technician or by a
competent serviceman of the user's choice who has adequate training in
those aspects of the Performance Standards of the Radiation Control for
Health and Safety Act of 1968 that are applicable to this equipment. Neither
the inspection nor service is part of the equipment warranty. (To be arranged
for by the Owner or User with the Dealer's Service Department).