Cumberland 064-11343, Installation Manual

Page: 62 / 138

Chapter 5: Expansion Box and Virtual Expansion Box Installation
WARNING
Installation must only be performed by qualified service personnel.
WARNING
Wear appropriate grounding devices such as an anti-static wristband to service the
system.
WARNING
Lock the enclosure once the wiring is completed or when servicing. Use the
included nut and bolt or a padlock (not included) to lock the enclosure.
CAUTION
Before servicing the system, disconnect the main voltage supply.
1. Unlock the Expansion Box and open the plastic cover.
2. Disconnect the main voltage supply and ensure the box is completely powered down.
3. Locate the plug-in module slot where you need to add the plug-in module.
4. Position the plug-in card so that it is aligned with the black connector on the backplane, and so the
red plastic handle aligns in the slots.
5. When the plug-in module is correctly aligned, press the card into the slot, ensuring the red plastic
carrier is locked in place at both the top and bottom.
62 890–00687 EDGE 2