Cuchen VEA062 Series, Manual

Page: 12 / 103

12
Taking Care of the Product
How to Replace Pressure Packing
•
The packing is designed to prevent leakage of steam and is designed not to easily fall out, but you can pull it out with some
force by hands. When necessary, you can remove it for cleaning.
•
The packing is a consumable item. If there is a steam leak, remove the packing and clean it. After cleaning, fix it back in
as shown below and check the condition. If there is still a leak, please purchase the packing at a retail store or Customer
Center.
•
It is recommended to replace the pressure packing periodically since its life span is about 1-3 years depending on the
number of uses. (The pressure packing is made of silicone.)
1 Pull out the pressure packing by hand as shown in the
figure to remove it.
2
Align the attachment marks on the pressure packing
and pressure lid as shown in the figure and push in
the spot.
3
The four spots of attachment marks have been
inserted.
Insert the spots in the numerical order.
1
Outer protrusion for
insertion
2
Inner protrusion for
insertion
• Pressure packing
Insertion order
1
→
2
4 attachment marks
on pressure packing
4 attachment marks
on pressure lid