Cuchen VEA062 Series, Manual

Page: 26 / 103

26
How to Adjust the Warming Temperature and Heating Level
Reheating Mode
1 Press and hold the [WARM/REHEAT] button for 3 seconds to enter Warming Temperature Setting
Mode.
2
Set the desired temperature using the [HOUR] and [MIN]
buttons.
•
The default temperature is 74 ℃ .
•
The temperature can be changed within 69 ~ 78
℃
.
•
If the rice is cold or smelly, increase the temperature by 2 ~ 3 degrees.
•
If the rice turns yellow, lower the temperature by 2 ~ 3 degrees.
3
Press the [COOK/OK] button to set the warming temperature and enter Warming Heat Control Mode.
4
Set the desired warming heat level using the [HOUR] and
[MIN] buttons.
•
The default heating level is 0
℃
.
•
The heating level can be changed within -2 ~ 5
℃
.
•
If the much moisture is formed on the lid, select a heating level of 1 ~ 2
℃
.
•
If the rice is too slushy near the inner pot surfaces or smells bad, select the
heating level of -2 ~ -1
℃
.
5
Press the [COOK/OK] button to finish setting the heating level.
If you press the [CANCEL] button before setting is completed or do not press any button for 15 seconds,
the setting reverts to the state before the change.
This function makes rice being warmed fresher and its taste closer
to newly cooked rice.
Press the [WARM/REHEAT] button during warming to start
reheating.
•
Reheating only works during warming.
•
When reheating is finished, the cooker switches back to the
warming mode.
•
During reheating, press the [WARM/REHEAT] button again to
cancel the reheating and switch back to warming.
Notes
•
It is recommended to eat the rice immediately after reheating.
•
It is recommended to eat other kinds of rice than PLAIN (mixed rice, brown rice, etc.) immediately after
cooking, because such kinds of rice may get discolored and become smelly when reheated.
•
If you use the reheating function too often, rice may be discolored or dry.
•
Reheating proceeds only when the lid handle is in the lock (●) position. When it is in the open (○)
position, warming continues after a beep. (If the clean cover is not attached, the product does not
recognize the lid lock and its reheating function does not work.)
During Warming