manualshive.com logo in svg

CTC Union IFS-1604GSM Series, User Manual

The CTC Union IFS-1604GSM Series is a cutting-edge networking product that offers reliable and high-performance connectivity. To ensure seamless utilization, we provide a comprehensive and user-friendly User Manual, available for free download from our website. Empower yourself with the necessary knowledge and discover the full potential of this exceptional product today.

Share
Download
background image

 

151 

 
 

CHAPTER 3 

CLI CONFIGURATION 

| af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 
| ef | va } | any } ] [ fragment { yes | no | any } ] [ sport { <sp4> | any } ] [ dport { <dp4> | any } ] } | { ipv6 [ proto 
{ <pr6> | tcp | udp | any } ] [ sip { <sip6> | any } ] [ dip { <dip6> | any } ] [ dscp { <dscp6> | { be | af11 | af12 | af13 | 
af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] 
[ sport { <sp6> | any } ] [ dport { <dp6> | any } ] } } ] [ action { [ cos { <action_cos> | default } ] [ dpl { <action_dpl> | 
default } ] [ pcp-dei { <action_pcp> <action_dei> | default } ] [ dscp { <action_dscp_dscp> | { be | af11 | af12 | af13 | 
af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | default } ] 
[ policy { <action_policy> | default } ] }*1 ]  
 

Explanation:

 To update the QCE. 

 

Parameters:  

 
 

{ [ update ] }: Update the QCE. 

 
 

<qce_id>: Specify the QCE ID. 

 
 

[ { next <qce_id_next> } | last ]: Put this QCE next to the specified one or to the last one. 

 

[ interface ( <port_type> [ <port_list> ] ) ]: Specify port type and port number that apply to this updated QCE rule. 
 
[ smac { <smac> | <smac_24> | any } ]: Set up the matched SMAC. 
 
[ dmac { <dmac> | unicast | multicast | broadcast | any } ]: Set up the matached DMAC. 

 

[ tag { [ type { untagged | tagged | c-tagged | s-tagged | any } ]: Set up the matched tag type. 
[ vid { <ot_vid> | any } ]: Specify a specific VID or VID range or specify “any” to allow any VIDs. 
 
[ pcp { <ot_pcp> | any } ]: Specify a specific PCP or PCP range or specify “any” to allow any PCP values. 
 
[ dei { <ot_dei> | any } ] } ]: Specify a specific DEI or specify “any” to allow any DEI. 

 

[ frame-type { any | { etype [ { <etype_type> | any } ] } | { llc [ dsap { <llc_dsap> | any } ] [ ssap { <llc_ssap> | 

any } ] [ control { <llc_control> | any } ] } | { snap [ { <snap_data> | any } ] } | { ipv4 [ proto { <pr4> | tcp | udp | 
any } ] [ sip { <sip4> | any } ] [ dip { <dip4> | any } ] [ dscp { <dscp4> | { be | af11 | af12 | af13 | af21 | af22 | af23 
| af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] [ fragment { yes 
| no | any } ] [ sport { <sp4> | any } ] [ dport { <dp4> | any } ] } | { ipv6 [ proto { <pr6> | tcp | udp | any } ] [ sip 
{ <sip6> | any } ] [ dip { <dip6> | any } ] [ dscp { <dscp6> | { be | af11 | af12 | af13 | af21 | af22 | af23 | af31 | 
af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] [ sport { <sp6> | any } ] 
[ dport { <dp6> | any } ] } } ]: Specify the frame type that applies to this QCE rule. 

 

any: 

By default, any is used which means that all types of frames are allowed. 

 

etype: 

This option can only be used to filter Ethernet II formatted packets. (Options: Any, Specific – 600-ffff 

hex; Default: ffff). Note that 800 (IPv4) and 86DD (IPv6) are excluded. A detailed listing of Ethernet protocol 
types can be found in RFC 1060. A few of the more common types include 0800 (IP), 0806 (ARP), 8137 (IPX). 
 

llc:

 LLC refers to Link Logical Control and further provides three options.  

 

dsap:

    DSAP  stands  for  Destination  Service  Access  Point  address.  By  default,  any  is  used.  Specify 

“any” or indicate a value (0x00 to 0xFF). 
 

ssap:

 SSAP stands for Source Service Access Point address. By default, any is used.  Specify “any” or 

indicate a value (0x00 - 0xFF). 

 

Summary of Contents for IFS-1604GSM Series


































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS-1604GSM Series

GE SecoGear User Manual preview
SecoGear
Brand: GE Pages: 36
GE Power Break Installation Instructions Manual preview
Power Break
Brand: GE Pages: 8
3Com SuperStack II Important Information preview
SuperStack II
Brand: 3Com Pages: 2
3Com CoreBuilder 5000 Quick Start And Reference preview
CoreBuilder 5000
Brand: 3Com Pages: 16
3Com CoreBuilder 9000 Quick Installation Manual preview
CoreBuilder 9000
Brand: 3Com Pages: 24
Panio HW2250K User Manual preview
HW2250K
Brand: Panio Pages: 5
Enterasys RoamAbout RBT-4102-BG Installation Manual preview
RoamAbout RBT-4102-BG
Brand: Enterasys Pages: 72
3Com 3C16710 - OfficeConnect 8/TPM Hub User Manual preview
3C16710 - OfficeConnect 8/TPM Hub
Brand: 3Com Pages: 130
Cabletron Systems FlowPoint 2100 12 User Manual preview
FlowPoint 2100 12
Brand: Cabletron Systems Pages: 36
Hawking PN824ES Specifications preview
PN824ES
Brand: Hawking Pages: 2
IPGARD SA-DVN-8D Quick Start Manual preview
SA-DVN-8D
Brand: IPGARD Pages: 2
Trust START-LINE AGC-3500 Important Information Manual preview
START-LINE AGC-3500
Brand: Trust Pages: 16
Endress+Hauser Liquipoint FTW33 Operating Instructions Manual preview
Liquipoint FTW33
Brand: Endress+Hauser Pages: 48
CGS Instruments SAM-1950 Operating Instructions Manual preview
SAM-1950
Brand: CGS Instruments Pages: 39
Thorn SENSALINK SENLSS V2 Installation And Commissioning Instructions preview
SENSALINK SENLSS V2
Brand: Thorn Pages: 2
KinAn XL1704 User Manual preview
XL1704
Brand: KinAn Pages: 8
Scion-Tech SC04.1404 Operating Instructions Manual preview
SC04.1404
Brand: Scion-Tech Pages: 16
NETGEAR GS105v5 Installation Manual preview
GS105v5
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands