![CTC Union IFS-1604GSM Series User Manual Download Page 97](http://html1.mh-extra.com/html/ctc-union/ifs-1604gsm-series/ifs-1604gsm-series_user-manual_2693578097.webp)
97
CHAPTER 3
CLI CONFIGURATION
Negation:
(config-if)# no lacp
Show:
# show lacp { internal | statistics | system-id | neighbour }
Clear:
# clear lacp statistics
3.9.21.3 (config-if)# lacp key
Syntax:
(config-if)# lacp key { <v_1_to_65535> | auto }
Explanation:
Configure a LACP key for this interface.
Parameters:
{ <v_1_to_65535> | auto }: Specify a LACP key for this interface. The “auto” setting sets the key as appropriate by
the physical link speed. If you want a user-defined key value, enter a value between 1 and 65535. Ports in an
aggregated link group must have the same LACP port Key. In order to allow a port to join an aggregated group,
the port Key must be set to the same value.
Negation:
(config-if)# no lacp key { <v_1_to_65535> | auto }
Show:
# show lacp { internal | statistics | system-id | neighbour }
3.9.21.4 (config-if)# lacp port-priority <v_1_to_65535>
Syntax:
(config-if)# lacp port-priority <v_1_to_65535>
Explanation:
Configure a LACP key for this interface.
Parameters:
<v_1_to_65535>}: Specify a LACP port priority for this interface. The lower number means greater priority. This
priority value controls which ports will be active and which ones will be in a backup role.
Negation:
(config-if)# no lacp port-priority <v_1_to_65535>
Show:
# show lacp { internal | statistics | system-id | neighbour }
3.9.21.5 (config-if)# lacp role { active | passive }
Syntax:
(config-if)# lacp role { active | passive }
Explanation:
Configure LACP role for this interface.
Parameters:
{ active | passive }: Specify either “Active” or “Passive” role depending on the device’s capability of negotiating
and sending LACP control packets. Ports that are designated as “Active” are able to process and send LACP
control frames. Hence, this allows LACP compliant devices to negotiate the aggregated like so that the group may
be changed dynamically as required. In order to add or remove ports from the group, at least one of the
participating devices must set to “Active” LACP ports.
Summary of Contents for IFS-1604GSM Series
Page 385: ......