162
CHAPTER 3
CLI CONFIGURATION
3.9.38.7 (config)# radius-server retransmit
Syntax:
(config)# radius-server retransmit <retries>
Explanation:
Configure the number of times to retransmit request packets to an authentication server that does not
respond. If the server does not respond after the last retransmit is sent, the switch considers the authentication server
is dead.
Parameters:
<retries>: Specify RADIUS server retransmit value. The valid range is 1 to 1000.
Example:
Set RADIUS server retransmit value to 5
Negation:
(config)# no radius-server retransmit
Show:
# show radius-server [statistics]
3.9.38.8 (config)# radius-server timeout
Syntax:
(config)# radius-server timeout <seconds>
Explanation:
Configure the time the switch waits for a reply from an authentication server before it retransmits the
request.
Parameters:
<seconds>: Specify RADIUS server timeout value. The valid range is 1 to 1000.
Example:
Set RADIUS server timeout to 60
Negation:
(config)# no radius-server timeout
Show:
# show radius-server [statistics]
3.9.39 (config)# ring
3.9.39.1 (config)# ring <instance> chain
Syntax:
(config)# ring <instance> chain [ master ] east interface <port_type> <east_port> [ edge ] west interface
<port_type> <west_port> [ edge ]
Parameters:
# config t
(config)# radius-server timeout 60
# config t
(config)# radius-server retransmit 5
Summary of Contents for IFS-1604GSM Series
Page 385: ......
