200
CHAPTER 3
CLI CONFIGURATION
Parameters:
username <username: word31>: Specify a new username. The allowed characters are 31.
privilege <priv: 0-15>: Specify the privilege level for this new user account. The allowed range is 1 to 15. If the
privilege level value is 15, it can access all groups, i.e. that is granted the fully control of the device. But other
values need to refer to each group privilege level. User's privilege should be same or greater than the group
privilege level to have the access of that group. By default setting, most groups privilege level 5 has the read-only
access and privilege level 10 has the read-write access. And the system maintenance (software upload, factory
defaults and etc.) need user privilege level 15. Generally, the privilege level 15 can be used for an administrator
account, privilege level 10 for a standard user account and privilege level 5 for a guest account.
password unencrypted <password: line31>: Specify the unencrypted password for this user account. The
UNENCRYPTED (Plain Text) user password. Any printable characters including space is accepted.
Example:
Create the new user account with the following settings.
Negation:
(config)# no username <username>
Show:
> show users
# show users
3.9.50 (config)# vlan
3.9.50.1 (config)# vlan
Syntax:
(config)# vlan <vlist>
Explanation:
Configure allowed VLANs.
Parameters:
<vlist>: This shows the allowed access VLANs. This setting only affects ports set in “Access” mode. Ports in other
modes are members of all VLANs specified in “Allowed VLANs” field. By default, only VLAN 1 is specified. More
allowed access VLANs can be entered by specifying the individual VLAN ID separated by comma. If you want to
specify a range, separate it by a dash. For example, 1, 5,10,12-15,100. Once Enter is pressed, the prompt changes
to (config-vlan)#
Example:
Add VID 1,5,10,12-15,100 to the allowed VLAN list.
Negation:
(config)# no vlan { { ethertype s-custom-port } | <vlan_list> }
# config t
(config)# vlan 1,510,12-15,100
(config-vlan)#
# config t
(config)# username mis4jack privilege 15 password unencrypted jack30125
Summary of Contents for IFS-1604GSM Series
Page 385: ......
