Chapter 4. Web Configuration & Operation
212
CHAPTER 4
WEB OPERATION & CONFIGURATION
4.2.11 System SMTP
Configure the email alert system.
SMTP Configuration
SMTP Mode:
Set the SMTP mode operation. Possible modes are:
Enabled:
Enable SMTP client mode operation.
Disabled:
Disable SMTP client mode operation.
SMTP Server:
Set the SMTP server IP address (this is the server that will forward email).
SMTP Port:
Set the SMTP port number. The default SMTP port is 25.
Server requires authentication:
Check this box if your server requires authentication. In most cases, this is required
and the following must be entered.
Username:
Enter
the valid authentication username for SMTP server
Password:
Enter the authentication password for username of SMTP server
Recipient mail address:
Up to four recipient’s E-mail addresses may be entered. When alert events are triggered,
email messages will be sent to the indicated email addresses.
SMTP Mail Event
These check boxes select what events will result in alert email messages being generated and sent.
System:
Enable/disable the System group’s mail events. Possible mail events are:
Warm Start:
Enable/disable Warm Start mail event.
Cold Start:
Enable/disable Cold Start mail event.
Summary of Contents for IFS-1604GSM Series
Page 385: ......
