184
CHAPTER 3
CLI CONFIGURATION
3.9.44.16 (config)# spanning-tree mst forward-time
Syntax:
(config)# spanning-tree mst forward-time <fwdtime>
Parameters:
<fwdtime: 4-30>: Specify forward delay value between 4 and 30 (seconds).
Explanation:
Fort STP bridges, the Forward Delay is the time spent in each Listening and Learning state before the
Forwarding state is entered. This delay occurs when a new bridge comes onto a network.
Example:
Set the forward delay to 15 seconds.
Negation:
(config)# no spanning-tree mst forward-time
Show:
# show spanning-tree
3.9.44.17 (config)# spanning-tree mst max-age
Syntax:
(config)# spanning-tree mst max-age <maxage> [ forward-time <fwdtime> ]
Parameters:
<maxage: 6-40>: Specify the max age value. The valid range is from 6 to 40.
[ forward-time <fwdtime> ]: Fort STP bridges, the Forward Delay is the time spent in each Listening and Learning
state before the Forwarding state is entered. This delay occurs when a new bridge comes onto a network. Valid
values are 4-30 seconds.
Explanation:
If another switch in the spanning tree does not send out a hello packet for a period of time, it is
considered to be disconnected. Valid values are 6 to 40 seconds, and Max Age values must be smaller than or equal to
(Forward Delay-1)*2.
Example:
Set the max age to 20 seconds.
Negation:
(config)# no spanning-tree mst max-age
Show:
# show spanning-tree
# config t
(config)# spanning-tree mst max-age 20
# config t
(config)# spanning-tree mst forward-time 15
Summary of Contents for IFS-1604GSM Series
Page 385: ......
