Chapter 4. Web Configuration & Operation
339
CHAPTER 4
WEB OPERATION & CONFIGURATION
4.18.2 Port Policing
This page allows users to set each port’s allowed bandwidth.
Port:
The port number. “Port *” settings apply to all ports.
Enabled:
Select the checkbox to enable port policing function on a port.
Rate:
Indicate the rate for the policer. By default, 500kbps is used. The allowed range for kbps and fps is 100 to
1000000. The allowed range for Mbps and kfps is 1 to 3300Mbps.
Unit:
Select the unit of measure for the policer.
Flow Control:
If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of
discarding frames.
Summary of Contents for IFS-1604GSM Series
Page 385: ......
