Chapter 4. Web Configuration & Operation
272
CHAPTER 4
WEB OPERATION & CONFIGURATION
Key:
If secret key is specified here, it will replace the global secret key. If you prefer to use the global value, leave this
field blank.
4.6 Aggregation
Compared with adding cost to install extra cables to increase the redundancy and link speed, link aggregation is a
relatively inexpensive way to set up a high-speed backbone network that transfers much more data than any one
single port or device can deliver. Link aggregation uses multiple ports in parallel to increase the link speed. And there
are two types of aggregation that are available, namely “Static” and “LACP”.
Under the Aggregation heading are two major icons, static and LACP.
4.6.1 Static
Aggregation Mode Configuration
Source MAC Address:
All traffic from the same Source MAC address is output on the same link in a trunk.
Destination MAC Address:
All traffic with the same Destination MAC address is output on the same link in a trunk.
IP Address:
All traffic with the same source and destination IP address is output on the same link in a trunk.
TCP/UDP Port Number:
All traffic with the same source and destination TCP/UDP port number is output on the same
link in a trunk.
Summary of Contents for IFS-1604GSM Series
Page 385: ......
