![CTC Union IFS-1604GSM Series User Manual Download Page 202](http://html1.mh-extra.com/html/ctc-union/ifs-1604gsm-series/ifs-1604gsm-series_user-manual_2693578202.webp)
202
CHAPTER 3
CLI CONFIGURATION
LLC (Logical Link Control):
This includes DSAP (Destination Service Access Point) and SSAP (Source
Service Access Point) values. By default, the value is 0xff. Valid range is 0x00 to 0xff.
group <grp_id>:
Indicate the descriptive name for this entry. This field only allows 16 alphabet characters (a-
z; A-Z) or integers (0-9).
Example:
Set VLAN protocol to eth2 0x88a8.
Negation:
(config)# no vlan protocol { { eth2 { <etype> | arp | ip | ipx | at } } | { snap { <oui> | rfc-1042 | snap-8021h }
<pid> } | { llc <dsap> <ssap> } } group <grp_id>
Show:
# show vlan protocol [ eth2 { <etype> | arp | ip | ipx | at } ] [ snap { <oui> | rfc-1042 | snap-8021h } <pid> ] [ llc
<dsap> <ssap> ]
3.9.51 (config)# web privilege group
Syntax:
(config)# web privilege group <group_name> level { [ cro <cro> ] [ crw <crw> ] [ sro <sro> ] [ srw <srw> ] }*1
Explanation:
Assign Aggregation group to crw (configuration/excute read-write) level 15.
Parameters:
group <group_name>: This name identifies the privilege group. Valid words are 'Aggregation' 'DHCP' 'Debug'
'Dhcp_Client' 'Diagnostics' 'EPS' 'ERPS' 'ETH_LINK_OAM' 'EVC' 'IP2''IPMC_Snooping' 'LACP' 'LLDP' 'Loop_Protect'
'MAC_Table' 'MEP' 'MVR' 'Maintenance' 'Mirroring' 'NTP' 'POE' 'PTP' 'Ports''Private_VLANs' 'QoS' 'RPC' 'Security'
'Spanning_Tree' 'System' 'Timer' 'UPnP' 'VCL' 'VLAN_Translation' 'VLANs' 'Voice_VLAN'.
level { [ cro <cro: 0-15> ] [ crw <crw: 0-15> ] [ sro <sro: 0-15> ] [ srw <srw: 0-15> ] }*1: Every group has an
authorization Privilege level for the following sub groups:
cro (configuration read-only): The privilege level is 1 to 15.
crw (configuration/execute read-write): The privilege level is 1 to 15.
sro (status/statistics read-only): The privilege level is 1 to 15.
srw (status/statistics read-write): The privilege level is 1 to 15.
User Privilege should be the same or greater than the authorization Privilege level to have access to that group.
Example:
Set Voice VLAN to VID 1000.
Negation:
(config)# no web privilege group <group_name> level
Show:
> show web privilege group <group_name> level
# show web privilege group <group_name> level
# config t
(config)# vlan protocol eth2 0x88a8 group a12
# config t
(config)# web privilege group aggregation level crw 15
Summary of Contents for IFS-1604GSM Series
Page 385: ......