CSI Wireless Seres, Reference Manual

Page: 119 / 134

Seres Reference Manual
99
•
Verify Seres’ unobstructed view of the sky
•
Verify the lock status of SBAS satellites (this can
often be done on the receiving device or with
the use with SLXMon running on a PC –
monitor BER value)
No DGPS position in external
RTCM mode
•
Verify that the baud rate of the RTCM input
port matches the baud rate of the external
source
•
Verify the pin-out between the RTCM source
and the RTCM input port (transmit from the
source must go to receive of the RTCM input
port and grounds must be connected - Refer to
Appendix B)
Non-differential GPS output
•
Verify Seres SBAS and lock status (or external
source is locked)