SkyBitz SkyHub & SkyCamera Installation 1
SkyHub with SkyCamera Installation
SkyHub Componets
•
SHB1000 SkyHub Tracking Device
•
SkyHub Mounting Bracket
•
6, 10-32 Tamper Proof Screws
•
SkyHub Short Shroud
•
6, 1/8 Inch sealing Blind Rivets
•
3M Primer 94 Ampoule
Tools Required:
•
Power Drill and 1/8 in Drill Bit
•
5/32 Inch Pin in Hex Tamper Proof Screwdriver
•
Blind Rivet Tool
•
50/50 Isopropyl Alcohol/Water Solution
•
Clean Rags
•
Tape Measurer
SkyHub Mounting Location
The SkyHub will be mounted to the exterior front wall of a Dry Van Trailer. The locations described
below are recommended for optimal communications with the SkyCam. The general dimensions
noted may be adjusted to avoid mounting on top of any logos or asset identification. For a Plate
Nose Trailer, the SkyHub will be mounted to the front wall horizontally, about 3 inches down from the
bottom of the top rail, and about 6 inches from the roadside edge with the connector on the left.
For a Sheet and Post Nose Trailer, the SkyHub will be mounted to the front wall vertically, about 3
inches down from the bottom of the top rail, and about 6 inches from the roadside edge with the
connector at the top.
