SkyBitz SkyHub & SkyCamera Installation 4
SkyCamera Installation
•
Use the SkyCamera bracket as a template to mark the location of the bracket and the 1.75-
inch camera hole
•
Drill the 1.75-inch hole for the camera and remove any burrs
•
Prep the VHB Tape mounting surface
o
Clean
with IPA solution
o
Abrade
lightly with Scotch-Brite pad
o
Clean again
with IPA solution
o
Prime
with 3M Primer 94 and wait at least 3 minutes
•
Insert the SkyCamera install tool into the hole
•
Remove the liner from all 4 pieces of VHB tape on the bracket
•
Align the camera hole in the SkyCamera Mounting Bracket with tool, ensure the bracket is
vertical, and press the bracket onto the trailer wall
•
Remove the SkyCamera install tool
•
Using the bracket as a template, drill the eight 3/16-inch rivet holes in the trailer wall
•
Install the eight 3/16-inch rivets