CSI Wireless Seres, Reference Manual

Page: 53 / 134

Seres Reference Manual
33
Note - For successful communications, the baud rate of the Seres
serial ports must be set to match that of the devices to which
they are connected. Chapter 6 describes the baud rate change
command.
2.6.6 Routing and Securing the Cable
When choosing a route for the Seres extension cable:
•
Avoid running cables in areas of excessive heat
•
Keep antenna cables away from corrosive chemicals
•
Do not run the extension cable through door or window jams
•
Keep the cable away from rotating machinery
•
Do not bend excessively or crimp the extension cable
•
Be careful not to apply tension to the cable
•
Remove unwanted slack from the cable at the opposite end to the antenna
•
Secure the cable route using plastic tie wraps
Warning - Improperly installed cables near machinery can be
dangerous