CSI Wireless Seres, Reference Manual

Page: 90 / 134

Seres Reference Manual
70
5.5.2 $JGEO
This message is used to display information related to the current
frequency of SBAS, and its location in relation to the Seres’ internal
antenna.
To query the Seres for the currently used SBAS satellite information, use
the following query:
$JGEO<CR><LF>
The receiver will respond with the following data message:
$>JGEO,Sent=1575.4200,Used=1575.4200,PRN=prn,Lon=lon,El=
ele,Az=az
This message response is summarized in the following table:
Data Field Description
$>JGEO Message header.
Sent=1575.4200 Frequency sent to the digital signal processor
Used=1575.4200 Frequency currently used by the digital signal processor
PRN=prn WAAS satellite PRN number
Lon=-lon Longitude of the satellite
El=ele Elevation angle from the Seres antenna to the WAAS satellite,
referenced to the horizon.
Az=az Azimuth from the Seres antenna to the WAAS satellite,
referenced to the horizon.
To monitor this information for dual SBAS satellites, add the ‘,ALL’ variable
to the $JGEO message as follows:
$JGEO[,ALL] <CR><LF>